CA40 (UNS J91153) chemical composition
Higher-carbon version of CA15 (cast AISI 420) with a specified carbon minimum, hardened and tempered to higher hardness for wear and erosion resistance. Used for valve seats, wear rings and pump wear parts where weldability is secondary.
- Designation
- CA40
- Material no.
- UNS J91153
- Standard
- ASTM A743
- Also known as
- ≈ AISI 420 (cast)
- Family
- Stainless cast steel
Chemical composition (mass %)
| Element | min | max |
|---|---|---|
| CCarbon | 0.20 | 0.40 |
| SiSilicon | – | 1.50 |
| MnManganese | – | 1.00 |
| PPhosphorus | – | 0.04 |
| SSulphur | – | 0.04 |
| CrChromium | 11.5 | 14.0 |
| NiNickel | – | 1.00 |
| MoMolybdenum | – | 0.50 |
| FeIron | remainder | |
Basis of values: Limits per ASTM A743.
We cast CA40
Tsitouras Foundry supplies stainless steel sand castings – and centrifugal castings for bushings and sleeves – with the heat treatment each grade requires (solution annealing; quenching and tempering for martensitic grades), spectrometric chemical analysis, mechanical testing and NDT, EN 10204 3.1 certificates, and CNC machining to the finished part in the group's own machine shop.
- Sand casting at our foundry in Mandra, Attica; centrifugal casting for bushings, sleeves and liners
- Heat treatment at the foundry (water, oil or air quench); CNC machining in our machine shop in Perama
- Spectrometer analysis of every heat, mechanical testing and NDT
- EN 10204 3.1 inspection certificates; ISO 9001 (both plants) and ISO 14001 (foundry) certified
Other grades in this family
For information only, without warranty: limits per the cited standard or, where stated, typical or house values; ≈ marks a comparable grade, not an equivalent. The current edition of the standard, the purchase order and the drawing govern.