Austenitic manganese steel (Hadfield steel) is the material of choice for high-impact crusher wear parts. It work-hardens progressively under impact in service, maintaining surface hardness while the core remains tough. Castings are solution-annealed before delivery.
| Property | Value | Note |
|---|---|---|
| Manganese content | 12–14% Mn standard · up to 22% Mn (GX130MnCr22-3) | Higher Mn and Cr additions matched to impact and abrasion balance |
| Grades cast | GX120Mn12 · GX120MnCr12-2 · GX130MnCr18-2 · GX130MnCr22-3 | EN 10293 designations; ASTM A128 equivalents on request |
| Structure (as-delivered) | Fully austenitic | Achieved by solution annealing + water quenching |
| Work-hardened surface | Up to ~500 HB in service | Only under repeated impact, not as-cast |
| Core toughness | High, does not fracture catastrophically | Key advantage over white iron in high-impact service |
| Application | Correct? | Why |
|---|---|---|
| Jaw crusher plates | ✓ Yes | High impact: work-hardening is essential |
| Cone crusher mantles & bowl liners | ✓ Yes | Impact + compression: toughness required |
| Impact crusher hammers | ✓ Yes (standard & high-Mn) | Extreme impact loading |
| VSI blades / knives | ✗ Usually not | Sliding abrasion: chrome iron is more effective |
| Mill liners (low-impact) | Depends | Use high-Mn only if an impact component exists |
PDF, STEP or DWG, or a sample. A single part or a series: cast, heat-treated and machined.