High-chromium white irons develop hard chromium carbides that resist sliding and low-stress abrasion. The correct grade depends on the abrasive type, section thickness and whether any impact component exists.
| Grade | Cr Content | Hardness (typical) | Best for |
|---|---|---|---|
| Ni-Hard | ~2% Cr | 550–700 HB | Fine abrasion, pump liners |
| GX300CrMo15-3 | 14–17% Cr | Min 55 HRC (delivered) | Mill blades and rotary wear parts (our standard mill grade) |
| GX300CrMo27-1 | 23–28% Cr | Min 55 HRC (delivered) | Severe abrasion, low impact (selected per rock type) |
Hardness values above are industry-typical reference ranges. Actual values depend on chemistry, section size and heat treatment. Confirmed values available on request for specific orders.
High-chromium white cast iron · Abrasion-resistant white cast iron (Ni-Hard)


PDF, STEP or DWG, or a sample. A single part or a series: cast, heat-treated and machined.