HF (19Cr-9Ni) chemical composition
19Cr-9Ni grade, the lowest-alloyed austenitic heat-resistant grade in ASTM A297. Higher carbon than the corrosion-resistant 19-9 castings gives strength at temperature; used for furnace parts and fixtures in moderately oxidising service.
- Designation
- HF
- Standard
- ASTM A297
- Also known as
- 19Cr-9Ni
- Family
- Heat-resistant cast steel
Chemical composition (mass %)
| Element | min | max |
|---|---|---|
| CCarbon | 0.20 | 0.40 |
| SiSilicon | – | 2.00 |
| MnManganese | – | 2.00 |
| PPhosphorus | – | 0.04 |
| SSulphur | – | 0.04 |
| CrChromium | 18.0 | 23.0 |
| NiNickel | 8.00 | 12.0 |
| MoMolybdenum | – | 0.50 |
| FeIron | remainder | |
Basis of values: Limits per ASTM A297.
We cast HF
We produce heat-resistant castings by sand casting, and by centrifugal casting for cylindrical parts such as rings, bushings and sleeves. Every heat is analysed by OES; heat treatment, CNC machining in the group's Perama machine shop and EN 10204 3.1 certificates are available.
- Sand casting at our foundry in Mandra, Attica; centrifugal casting for bushings, sleeves and liners
- Heat treatment at the foundry (water, oil or air quench); CNC machining in our machine shop in Perama
- Spectrometer analysis of every heat, mechanical testing and NDT
- EN 10204 3.1 inspection certificates; ISO 9001 (both plants) and ISO 14001 (foundry) certified
Other grades in this family
For information only, without warranty: limits per the cited standard or, where stated, typical or house values; ≈ marks a comparable grade, not an equivalent. The current edition of the standard, the purchase order and the drawing govern.