← Projects
Pouring molten steel into sand moulds at the TSITOURAS foundry
Project · Marine / Deck Equipment

Anchor Windlass Gear

One gear, every stage in-house, photographed as it happened. This is what "cast, heat-treated and machined under one project number" actually looks like on our shop floor.

Wooden pattern of the windlass gear, built in the pattern shop
01 · PATTERN

The wooden pattern is built in our pattern shop with per-alloy shrinkage allowances and per-dimension machining stock, then inspected 100% before it ever touches sand.

Coating the closed sand mould with refractory wash before pouring
02 · MOULD

The mould is closed, coated with refractory wash and fitted with feeders sized for the section: the quiet work that decides whether a casting is sound.

Two ladles pouring molten metal into the moulds
03 · POUR

Chemistry verified by OES before the pour; temperature held within the grade's pouring range. Two ladles, one rhythm. This is the moment everything upstream was for.

The windlass gear mounted on the vertical lathe for machining
04 · MACHINE

After heat treatment, the gear goes onto the lathe at our Perama machine shop and comes off at final drawing dimensions, inspected, documented, ready to install.

Casting Quote

Send us your drawing.
We respond within 24 hours.

PDF, STEP or DWG, or a sample. A single part or a series: cast, heat-treated and machined.

Send your drawing → Quote request form
sales@foundry.gr · +30 210 5550700