Aluminium casting alloys
EN AC-43000 (AlSi10Mg) chemical composition
Aluminium casting alloy EN AC-43000 (AlSi10Mg)
AlSi10Mg(a): higher silicon than AlSi7Mg for better fluidity in thin walls and complex shapes, with tight limits on copper and other impurities. Heat-treatable; used for housings and pressure-tight castings.
- Designation
- EN AC-43000
- Standard
- EN 1706
- Also known as
- AlSi10Mg, EN AC-AlSi10Mg, AlSi10Mg(a)
- Family
- Aluminium casting alloys
Chemical composition (mass %)
| Element | min | max |
|---|---|---|
| SiSilicon | 9.00 | 11.0 |
| MnManganese | – | 0.45 |
| CrChromium | – | 0.05 |
| NiNickel | – | 0.05 |
| CuCopper | – | 0.05 |
| TiTitanium | – | 0.15 |
| FeIron | – | 0.55 |
| SnTin | – | 0.05 |
| ZnZinc | – | 0.10 |
| PbLead | – | 0.05 |
| MgMagnesium | 0.20 | 0.45 |
| AlAluminium | remainder | |
Basis of values: Limits per EN 1706.
We cast EN AC-43000
We sand cast these aluminium alloys and machine the castings in the group's own CNC machine shop; the chemistry is verified by spectrometer and EN 10204 3.1 certificates are available.
- Sand casting at our foundry in Mandra, Attica; centrifugal casting for bushings, sleeves and liners
- Heat treatment at the foundry (water, oil or air quench); CNC machining in our machine shop in Perama
- Spectrometer analysis of every heat, mechanical testing and NDT
- EN 10204 3.1 inspection certificates; ISO 9001 (both plants) and ISO 14001 (foundry) certified
Other grades in this family
For information only, without warranty: limits per the cited standard or, where stated, typical or house values; ≈ marks a comparable grade, not an equivalent. The current edition of the standard, the purchase order and the drawing govern.